Recent Research Publications of NML Madras Centre
1. S. Srikanth, S. K. Das, C.
Sasikumar and B. Ravikumar
Failure
of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat
recovery boiler
Engineering
Failure Analysis, 14, 2007,
262-278
2. M. Muthukumar, M. Thalamadai
Karuppiah and G. Bhaskar Raju
Electrochemical
removal of CI acid orange 10 from aqueous solutions
Separation and
Purification Technology, 55, 2007,
198-2005
3.
G. Bhaskar Raju, S.
Prabhakar and S. Subba Rao and K. Gopalakrishna
Pilot
scale studies on the treatment of tannery effluent by electro-flotation
International Jl.
Of Environment & Pollution, Vol.
30 (2) 2007 328 - 340
4. C.Sasikumar, D.S.Rao,
S.Srikanth, N.K.Mukhopadhyay and S.P.Mehrotra
Disssolution
studies of mechanically activated Manavalakurichi ilmenite with HCl and H2SO4
Hydrometallurgy,
88, 2007, 154-169
5.
Satendra Kumar, T.S.N.
Sankara Narayanan, A. Manimaran and M. Suresh Kumar
Effect of
lead content on the dezincification behaviour of leaded brass in neutral and acidified
3.5% NaCl solution
Materials
Chemistry and Physics, 106 (2007)
134-141
6.
Young Woo Park, T.S.N.
Sankara Narayanan and Kang Yong Lee
Effect
of temperature on the fretting corrosion of tin plated brass connectors
Wear,
262 (2007) 320–330
7. T.S.N.
Sankara Narayanan, Young Woo Park and Kang Yong Lee
Fretting-corrosion
mapping of tin-plated copper alloy contacts
Wear,
262 (1-2) (2007) 228-233.
8. T.S.N.
Sankara Narayanan, Young Woo Park and Kang Yong Lee
Fretting
corrosion of lubricated tin plated copper alloy contacts: Effect of temperature
Tribology
International, 41 (2008) 87-102.
9. P.Shanmuganathan,
P.Lakshmipathiraj, S.Srikanth, A.L.Nachiappan and A.Sumathy
Toxicity
characterization and long-term stability studies on copper slag from the ISASMELT process
Resources,
Conservation and Recycling
52 (2008) 601-611
10. Chennakesavulu,
K., Bhaskar Raju, G., Prabhakar, S., Madhavan Nair, C., Murthy, K.V.G.K.
Adsorption of
oleate on fluorite surface as revealed by atomic force microscopy
INTERNATIONAL
JOURNAL OF MINERAL PROCESSING
2008, Vol. 90,
pp 101-104
11. Sankara Narayanan,
T.S.N., Park, Y.W., Lee, K.Y.
Fretting
corrosion of lubricated tin plated contacts
INDUSTRIAL
LUBRICATION AND TRIBOLOGY, 2008, Vol.60, Iss
5, pp 233-241
12. Sankara Narayanan, T.S.N., Park, Y.W.,
Lee, K.Y.
Evaluation of
electroless Ni-B coating under fretting conditions for electrical connector contact
applications
SURFACE REVIEW
LETTERS, 2008, Vol.15,
Iss 4, pp 443-452
13. Park, Y.W., Sankara Narayanan,
T.S.N., Lee, K.Y.
Fretting
corrosion of tin plated contacts
TRIBOLOGY
INTERNATIONAL, 2008, Vol.41, pp
616-628
14. Sankara Narayanan, T.S.N.,
Park, Y.W., Lee, K.Y.
Fretting
corrosion of lubricated tin plated copper alloy contacts: Effect of temperature
TRIBOLOGY
INTERNATIONAL, 2008 , Vol.41,
pp 87-102
15. Krishnaveni, K; Sankara Narayanan,
TSN; Seshadri, SK
Electrodepo
sited Ni-B-Si3N4 composite coating: Preparation and
evaluation of
its characteristic properties
JOURNAL OF
ALLOYS AND COMPOUNDS, 2008, Vol 466, Iss
1-2, pp 412-420
16. Kumar, S; Sankara Narayanan, TSN
Corrosion
behaviour of Ti-15Mo alloy for dental implant applications
JOURNAL OF
DENTISTRY, 2008, Vol 36,
Iss 7, pp 500-507
17. S. Ananda Kumar,
M.Sreemeenakshi, T.S.N.Sankaranarayanan and S.Srikanth Corrosion resistant behaviour of
PANI-metal bilayer coatings
PROGRESS IN ORGANIC COATINGS, 2008, 62,
285-292
18. Lakshmipathiraj, P; Bhaskar Raju,
G; Basariya, MR; Parvathy, S; Prabhakar, S
Removal of Cr
(VI) by electrochemical reduction
SEPARATION AND
PURIFICATION TECHNOLOGY 2008, Vol 60, Iss
1, pp 96-102
19. Bhaskar Raju, G; Karuppiah, MT;
Latha, SS; Parvathy, S; Prabhakar, S
Treatment of
wastewater from synthetic textile industry by electrocoagulation-
electro-oxidation
CHEMICAL
ENGINEERING JOURNAL 2008, Vol. 144,
Iss 1, pp 51-58
20. Rao, D.S., Vijaya Kumar, T.V.,
Subba Rao, S., Prabhakar, S. and Bhaskar Raju, G.
Mineralogy and
Geochemistry of a low grade iron ore sample from Bellary-Hospet Sector, India and their
implications on beneficiation
JOURNAL OF
MINERALS & MATERIALS CHARACTERIZATION &ENGINEERING 2008, Vol. 8,
Iss. 2, pp 115-131
21. P.Shanmuganathan,
P.Lakshmipathiraj, S.Srikanth, A.L.Nachiappan and A.Sumathy: Toxicity Characterization and
Long Term Stability Studies on Copper Slag from the ISASMELT Process
RESOURCES
CONSERVATION & RECYCLING, 2008,
52,
601-611
22. S.Ananda Kumar, M.Sreemeenakshi,
B.R.V.Narasimhan, S.Srikanth and G.Arthanareeswaran: “Synthesis and characterization
of copper nanofluid by a novel one-step method
MATERIALS CHEMISTRY AND PHYSICS, Jan 2009, 113
23. M.Kumar, S.Srikanth,
B.Ravikumar, T.C.Alex and S.K.Das
Synthesis
of Pure and Sr-doped LaGaO3,
LaFeO3 and LaCoO3 and Sr,Mg-doped LaGaO3 for ITSOFC
Application Using Different Wet Chemical Routes
MATERIALS CHEMISTRY
AND PHYSICS, 2009, 113, 803-815
24. D.S.Rao, T.V. Vijaya Kumar, S.
Prabhakar and G. Bhaskar Raju
Beneficiation of a siliceous limestone sample
AT
Mineral Processing. 2009. Vol.6, pp. 36 – 47
25. M.T.Karuppiah and G.Bhaskar
Raju.
Anodic
degradation of CI Reactive Blue 221 using graphite and IrO2/TaO2/RuO2 coated titanium
electrodes.
Industrial
Engineering Chemistry Research. 2009, Vol. 48, 2149-2156
|
